Insure you have installed the Virtual Com Port drivers for your radio or interface before connecting the USB Cable to the computer. This method requires a Virtual Com Port driver, which can be downloaded from the radio manufacturer's website. The USB interface provides for Rig Control and an Audio Codec for the radio's internal soundcard. If the cable you are currently using or plan to use doesn't have the ferrite chokes, it's recommended you purchase some of the 'snap-on' chokes that are available from or on eBay and attach them to the cable you are using. These chokes help prevent RF radiation, which may be present in any shack, from feeding back into the computer, which can sometimes cause some very strange behavior in the HRD software. Notice the 'Ferrite Chokes' on each end of the cable.

SignaLink, Rig Blaster, Rig Expert, or other interface) is required because this USB cable provides the connection for the Rig Control and it also carries the Audio for the radio's built-in soundcard which is accessed by a 'USB Audio CODEC' once the proper driver from the radio's manufacturer is installed.īelow is an image of the USB cable we recommend. The most common way of interfacing your radio to the computer is via a standard A/B type USB cable. Important: Please read and understand the instructions in this document prior to connecting your radio to the computer. Win4Yaesu Suite also supports DX4WIN, DXKeeper, Logger32, WinLog32, Logic 9, N1MM+, NAP3 and any hardware device that supports the Yaesu FTDX radios via serial port interfaces and standard CAT commands.Solution home Knowledgebase Radio Support FT-991A USB Configuration Win4Yaesu Suite also comes with a Ham Radio Deluxe compatible server interface allowing HRD LogBook and DM780 to connect and log frequency band and mode information.

Point and click control of the Yaesu radio functions without using dual purpose buttons or entering menus.īuilt in Spotting using your ClubLog profile!Īccess to the Radio Menus: Ability to export and import all settings to a file!Īnd of course Win4Yaesu Suite comes with built in Panadapter software

All functions are provided in an easy to use interface that easily allows control of many options that are hidden in the Yaesu radio interface. Win4Yaesu Suite is a windows control program for the Yaesu FTDX-1200, 3000, 5000, 9000 and FT-991 / A transceivers supporting options such as the LPPAN Panadapter and the SDRPlay.

Yaesu ft 991 programing software